series am15ew-z 15 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 1 of 3 north america only features: models single output model input voltage (v) output voltage (v) output current max (a) capacitive load ( f) efficiency (%) am15ew-2403sz 9-36 3.3 3 3300 80 am15ew-2405sz 9-36 5 3 3300 83 am15ew-2412sz 9-36 12 1.25 680 85 am15ew-2415sz 9-36 15 1 470 86 am15ew-4803sz 18-72 3.3 3 3300 80 am15ew-4805sz 18-72 5 3 3300 83 am15ew-4812sz 18-72 12 1.25 680 85 am15ew-4815sz 18-72 15 1 470 86 models dual output model input voltage (v) output voltage (v) output current max (a) capacitive load ( f) efficiency (%) am15ew-2405dz 9-36 5 1.5 2200 83 am15ew-2412dz 9-36 12 0.625 470 85 am15ew-2415dz 9-36 15 0.5 330 86 am15ew-4805dz 18-72 5 1.5 2200 83 am15ew-4812dz 18-72 12 0.625 470 85 AM15EW-4815DZ 18-72 15 0.5 330 86 input specifications parameters nominal typical maximum units voltage range 24 9-36 vdc 48 18-72 filter ? isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1500 vdc case/ input & output 1000 vdc resistance > 1000 mohm capacitance 1200 pf output specifications parameters conditions typical maximum units voltage accuracy 1 % voltage balance (dual output) balance load 1 % ? rohs compliant ? ? efficiency up to 86% ? ? wide 4:1 input range input/output isolation 1500vdc ? continuous short circuit protection operating temperature -40 o c to + 85 o c
series am15ew-z 15 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 2 of 3 north america only output specifications (continued) parameters conditions typical maximum units short circuit protection continuous short circuit restart auto recovery current limiting 140 % of iout max line voltage regulation hl-ll 0.5 % load voltage regulation 10-100% load 0.5 % load voltage regulation below 10% load 1.0 % temperature coefficient 0.02 %/ o c ripple & noise at 20mhz bandwidth 75 mv p-p rising time 10 ms general specifications parameters conditions typical maximum units switching frequency 100% load 300 khz operating temperature derating above 60oc -40 to +85 o c storage temperature -40 to +125 o c maximum case temperature 100 o c cooling free air convection humidity 95 % case material nickel coated copper weight 30 g dimensions (l x w x h) tolerance 0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm mtbf >1 121 000 hrs (mil-hdbk -217f, ground benign, t=+25 o c) note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. safety specifications standards agency approvals ce standards en55022 class a, en55024 iec61000-4-2, perf. criteria b iec61000-4-3, perf. criteria a iec61000-4-4, perf. criteria b iec61000-4-6, perf. criteria a iec61000-4-8, perf. criteria a note: also designed to meet iec 60950 1:2001 pin out specifications pin single dual 1 on/off control on/off control 2 -v input -v input 3 +v input +v input 4 -v output -v output 5 no pin common 6 +v output +v output
series am15ew-z 15 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 3 of 3 north america only dimensions derating test circuit conducted emissions: note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. -40 -20 0 2040 6080 100 100 80 60 40 20 0 safe operating area output power (%) 85 ambient temperature o c a b a free air 60 o c b 100 lfm 75 o c 5.08 (0.20) min notes: all dimensions are typical in millimeters (inches). tolerance 0.25 (0.01) dia 1.00 (0.04) 50.80 (2.00) 25.40 (1.00) 10.16 (0.40) built-in stand-offs to ease pcb cleaning 1 2 3 4 5 bottom view 20.32 (0.80) 15.24 (0.60) 15.24 (0.60) 7.62 (0.30) 10.16 (0.40) 5.08 (0.20) 10.16 (0.40) 10.16 (0.40) 6 2.54 (0.10) 2.54 (0.10)
|
